2020
The Cost of Turbine Modifications on HRSG Tubing; Power Magazine
Application of EPRI Creep and Fatigue Lifing Calculator–Lifing of Soft Grade 91 Materials, EPRI, Palo Alto, CA: 2020. 3002017628
Boiler Tube Failure Reduction Program, EPRI, Palo Alto, CA: 2020. 3002018747
2019
Best Practice Guideline for the Solicitation of Nondestructive Examination Services, EPRI, Palo Alto, CA: 2019. 3002016791
2018
ASME Boiler Code Update: 2018, EPRI, Palo Alto, CA: 2019. 3002017108
High-Energy Water Piping Assessment Handbook, EPRI, Palo Alto, CA: 2018. 3002013407
2017
Cold Reheat High-Energy Piping Assessment Handbook, EPRI, Palo Alto, CA: 2017. 3002010392
Ferritic Superheater and Reheater Tubing Life Assessment Handbook, EPRI, Palo Alto, CA: 2017. 3002011916
2016
Arnold J.L., “Maintenance Matters: Transitioning from Radiography to Phase Array UT for Contractual Weld Examinations,” Energy-Tech Magazine, November 2016
Main Steam and Hot Reheat High-Energy Piping Assessment Handbook, EPRI, Palo Alto, CA: 2016. 3002008606
Phased Array Ultrasonic Examination Guideline for Damage Detection and Sizing in Clamshell Welded Header Tees: 2016 Update, EPRI, Palo Alto, CA: 2016. 3002008518
2015
Arnold, J.L., “Developing an Effective High-Energy Piping Program,” Energy-Tech Magazine, October 2015
Arnold, J.L., “Small Diameter Boiler Tube Butt Weld Acceptance Criteria,” presented at the EPRI International Conference on Boiler Tube and HRSG Tube Failures and Inspections, held in Baltimore, Maryland in May 2015
Arnold J.L., Clark, M., “The Ins and Outs of High-Energy Piping Systems,” Energy-Tech Magazine, January 2015
Ferritic Superheater and Reheater Tubing Life Assessment Handbook, EPRI, Palo Alto, CA: 2015. 3002005870
2014
Arnold, J.L., “Serviceability Assessment of Creep Strength Enhanced Ferritic Steels, ETS2014-1028,” presented at the ASME Symposium on Elevated Temperature Application of Materials for Fossil, Nuclear, and Petrochemical Industries held in Seattle Washington in March 2014. [Paper subsequently published in the ASME Pressure Vessel Technology, PVT-14-1139]
Assessment of Eddy Current Arrays for the Detection of Repair Welds in Grade 91 Cast Valve Bodies, EPRI, Palo Alto, CA: 2014. 3002004825
Ultrasonic Acceptance of Small Diameter Boiler Tube Butt Welds, EPRI, Palo Alto, CA: 2014. 3002003418
2012
McDonald, C., Arnold, J.L., Henry, J.F., “Grain Boundary Graphitization in P1 (C-1/2Mo) Alloy Pipe, PVP2012-78537,” presented at the ASME PVPV2012 Conference held in Toronto, Canada
Technology for the Examination of Boiler Tubing Dissimilar Metal Welds, Revision 1, EPRI, Palo Alto, CA: 2012. 1026538
2011
Arnold, J.L., Bisbee, L.H., Pratt, J., “Interdependence of Renewable and Conventional Fossil Power Generation, POWER2011-55275,” presented at the ASME POWER2011 Conference held in Denver, Colorado in July 2011
Arnold, J.L., “Good stewardship: The key to maintaining steam generator reliability and availability,” Energy-Tech, March 2011 ASME Feature Article
Review and Optimization of the Existing Technology for Examination of High Temperature Header Components,” EPRI, Palo Alto, CA: 2011. 1022016
2010
Arnold, J.L., Skelonis, C.D., Knoll, M., “Evaluation of Circumferential Cracking in Sub-Critical Coal-Fired Boiler Waterwall Tubing,” presented at the EPRI International Conference on Boiler Tube and HRSG Tube Failures and Inspections, held in Baltimore, Maryland in April 2010
2007
Arnold, J.L., Hunter, G., “Current Technologies for the Assessment and Lifing of High Temperature Boiler Tubing Dissimilar Metal Welds”, presented at the EPRI International Conference on Boiler Tube and HRSG Tube Failures and Inspections, held in Calgary, Alberta, CANADA in October 2007
2006
Clark, M., Metzler, C., Arnold, J.L., Elkins, C., “The Use of Linear Phased Array Ultrasonics for the Inspection of Boiler Tube Welds in Lieu of Radiography”
Clark, M.D., Huntsman, L., Healy, Q., Arnold, J.L., “PacifiCorp Energy’s Experience with Circumferential Weld Repairs in High Energy Piping Systems”
2004
Ward, C.T., Henry, J.F., Arnold, J.L., “Stress Corrosion Cracking of Creep-Strength Enhanced Ferritic Steels,” presented at the EPRI Boiler Tube and HRSG Tube Failures and Inspections International Conference, held in San Diego, California in November 2004
2000
Arnold J.L., “Developing a Life Management Project – Identifying the Appropriate Technologies,” presented at ICOLM 2000, Life Management and Life Extension of Power Plant, held in Xian, China
1996
Arnold, J.L., Henning, W.A., “Visual Inspection and Nondestructive Testing Guidelines for Boiler Drums and Deaerators,” 1996, ALSTOM Power TIS 8639
1992
Arnold, J.L., “Deaerator Heater Erosion,” presented at the 1992 PowerGen Conference in Tampa, Florida